TRIFLEX®Windows
1.4.0
6
June 2000
TRIFLEX®
Windows 1.4.0 Enhancements
Pipe
property dialogs and database were modified to include Fiberglass
Reinforced Plastic Pipe.
The manual and HELP facility were changed to reflect
this addition.
BS
7159 Piping Code Compliance capabilities were added on data
entry and output reports. The manual and HELP facility were
changed to reflect this addition.
BS
8010 Piping Code Compliance capabilities were added on data
entry and output reports. The manual and HELP facility were
changed to reflect this addition.
ASME
Class 2 & 3 Pre and Post 1984 Code Compliance capability
were added on data entry and output reports. The manual
and HELP facility were changed to reflect this addition.
“Previous”
and “Next” component buttons were added to component dialog
screen to easily review the data.
More
flexibility has been added to “RIPPLING”. One can “RIPPLE” not only the Size, Content,
Material and Insulation, but also can “RIPPLE” to a “NODE”,
or stop if the content is different.
Print
Preview for Input information has been added. (working
on)
Keyboard
"Page-Up", "Page-Down", "Home",
"End" were enabled for the spreadsheet mode.
A
new ZOOM feature was added to the Graphical Manipulation
Toolbar Menu. This
new feature allows the user to enlarge a window of area
to be (Zoomed) viewed.
Graphic
on-screen display of the components global coordinates were
added.
Modifications
Coding
“Bends” have been changed to coincide with the coding of
a “Bend” in DOS TRIFLEX.3.
The
default units for the input dialog screen and the output
report to the Polska Norma PN-79/M 340033 are in N/mm2.
A
message has been added to IMPORT to reflect the fact the
computer is busy importing the job.
The
wording for several of the Piping Compliance Codes on the
Default Data pull-down menu screen was corrected.
On
the Reducer dialog screen the weight field and the display
of the weight of the reducer with no contents or insulation
has been grayed out.
The
fittings for the Flange, Valve, and Bend now reflect the
proper inheritance from the previous component.
Screen
HELP dialogs are available for each data field to be entered.
The
Output Report (for the Report System Properties Report)
has been corrected to display and print the correct fields
for "Mill Tolerance”.
The
Output Report (for the Report System Stresses) has been
corrected to display and print the correct fields for "
linear and angular dislocations values”.
The
Output Report (for Report System Maximum Values) has been
corrected to display and print the correct fields for "SIF
IN and SIF OUT”.
The
Output Report (for Report B31.3 Piping Code) has been corrected
to display print and display the correct values.
The
display for the number of digits behind the decimal for
the IU1 units for stresses was shortened to three significant
digits.
The
Case definition is automatically defaulted to one Operating
Case with Code Compliance Reports.
