Network
Installation Instructions
Applies
to MS Windows NT 4.0 and MS Windows 2000 Operating Systems.
The
following items are required for a Network installation:
1) TRIFLEX
Windows program on CD
Included
on the CD in the a program for the License Manager (LMSETUP.exe)
and a Device Drivers (HDDInstall.exe) which are referred
to by the installation process below.
2) A
HASP hardware security key (plug).
Important:
TRIFLEX Windows License Manager will search the Network
for the HASP security plug. It is highly recommended that
the HASP key be installed on the PC where TRIFLEX v1.5.x
program and its License Manager resides. Each user can load
TRIFLEX Windows on their assigned PC for optimum performance.
The Server unit may also function as a Client system.
If you're
installing TRIFLEX Windows v1.5.x or later versions and
you currently have 1.4.0 version installed on the network,
you must UNINSTALL the License Manager of 1.4.0. This is
to be accomplished before you install the v1.5.x update
version of NetHASP License Manager. To uninstall the NetHASP
License Manager follow the procedure below. Once you install
the License Manager we strongly suggest you use HDDInstall
to install the new Device Drivers in on the fly in an update
mode, this will prevent the Network from being brought down
to update the device driver. We do not recommend installing
the new Device Drivers from the License Manager program
because you may be installing the License Manager on the
Server. If your are installing new Device Drivers on the
Server and use the Device Driver routine in License Manager
you will have to shut down the Server in order for the new
Device Drivers to take effect. This procedure is also included.
Procedure
for UNINSTALLING License Manager
1) Login
as the network System Administrator. Access to the Server
handling the Triflex program and the system with the HASP
key installed on it can be accomplished from any PC on the
network.
2) Under
Start > Programs>NetHASP License Manager click on
Uninstall NetHASP License Manager and Open the Uninstall
NetHASP License Manager.
3) The
"Confirm File Deletion" screen appears. Click
Yes.
4) Click
Yes to the "NetHASP LM Setup Warning" screen to
remove the License Manager.
5) Click
OK to the "Remove Programs From Your Computer"
screen will appear and All references and links to License
Manager are removed in Start/Programs and on default drive
*:/ .
Installing
NetHASP License Manager
1) After
Installing TRIFLEX v1.5.x on the Server via the CD-ROM,
execute LMSETUP.exe.
The
LMSETUP.exe file is located at:
*:\Program
Files\PipingSolutions\TriflexWindows\HASP (folders)
(Make
a note of the 10-digit serial number on HASP. This number
is to be entered later at the appropriate time in the installation
process.)
2) Install
the HASP plug on the parallel/LPT1 port.
3) Login
as the network System Administrator. Access to the Server
unit handling the Triflex program and the system unit with
the HASP key installed on it can be accomplished from any
PC on the network.
4) Answer
Yes to the "InstallShield Self extracting exe".
5) Click
Yes to Continue "Setup" installation. This assumes
that no other applications are running. If there are other
applications running you may wish to close and exit these
applications.
6) The
"NetHASP License Manager Status" appears, click
Next.
7) Click
Service on the "Setup Type" screen.
8) Click
on Next on the "Select Destination Directory"
screen.
9) Select
Yes to the "Confirm Newly Selected directory"
screen.
10)
Click on Next on the "Select Program Folders"
screen.
11)
Click on Next on the "Confirm your Selection"
screen. (View No. 7)
12)
Click OK on "Information" screen.
13)
Click YES on the "Setup" screen. (View No. 8)
14)
Answer No to the "Setup" screen asking to install
HASP Device Drivers.
15)
Click on Yes on the "Start Services" screen.
16)
Click OK to the "Information " scree relating
that the Licenses Manager services was started sucessfully.
17)
Close the NetHASP License Manager Window.
18)
See message The Operation was completed successfully. Click
OK.
19)
Click Finish to the "Setup Complete" screen.
Installing
Device Drivers
1) After
Installing the License Manager execute HDDInstall.exe located
in the following path:
*:\Program
Files\PipingSolutions\TriflexWindows
2) Click
OK to the "HDDInstall" screen.
3) To
Complete the Installation. Locate and edit NetHASP.ini file
located in the following path:
*:\Program
Files\PipingSolutions\TriflexWindows
4) After
Editing Nethasp under Notepad, click on File and Save. This
step will insure the network connection will be made the
next time you start TRIFLEX Windows.
